| Numéro |
MATEC Web of Conferences
Volume 7, 2013
JA 2013 – Journées Annuelles de la SF2M 2013 / SF2M Annual Meeting 2013
|
|
|---|---|---|
| Numéro d'article | 04018 | |
| Nombre de pages | 2 | |
| Section | Colloque 4 : Biomatériaux / Biomaterials | |
| DOI | https://doi.org/10.1051/matecconf/20130704018 | |
| Publié en ligne | 7 novembre 2013 | |
Sol-gel synthesis of 45S5 bioglass – Prosthetic coating by electrophoretic deposition
1 LISM EA 4695, URCA, 21 rue Clement Ader, BP. 138, 51685 Reims Cedex 02, France
2 Team MéDIAN-Biophotonic and Technologies for Health, University of Reims Champagne-Ardenne, MEDyC ENG CNRS3481 Unit, Faculty of Pharmacy, 51 rue Cognac-Jay, 51096 Reims, France
In this work, the 45S5 bioactive glass has been prepared by the sol-gel process using an organic acid catalyst instead of nitric acid usually used. The physico-chemical and structural characterizations confirmed and validated the elemental composition of the resulting glass. In addition, the 45S5 bioactive glass powder thus obtained was successfully used to elaborate by electrophoretic deposition a prosthetic coating on titanium alloy Ti6Al4V.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.