| Numéro |
MATEC Web of Conferences
Volume 7, 2013
JA 2013 – Journées Annuelles de la SF2M 2013 / SF2M Annual Meeting 2013
|
|
|---|---|---|
| Numéro d'article | 02005 | |
| Nombre de pages | 2 | |
| Section | Colloque 2 : Assemblages, Soudage et Collage / Joining, Welding and Sticking | |
| DOI | https://doi.org/10.1051/matecconf/20130702005 | |
| Publié en ligne | 7 novembre 2013 | |
Development of specific materials for the high power electronic components in electric vehicles
1 MinesParisTech, France
2 GRISET S.A., France
3 CNAM-SATIE, France
The powerchain in electric vehicles sets new demands on semi conductors and their packaging. The latter will be specifically addressed. The power density per cm2 in DC/DC or DC/AC converters requires a mastering of thermomecahnical aspects. The temperature cyling, the environment under the hood of the vehicles and the “hybrid” technology impose severe constraints on the assemblies which may be met by architectured substrates, new options for assemblies and efficient cooling systems. An optimised semi conductor substrate associating copper and invar in a will be developed, relying on roll bonding to produce the 3D architecture. Roll bonding may also be used to associate aluminium and iron to produce light laminates with a CEM performance.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.