| Issue |
MATEC Web of Conferences
Volume 14, 2014
EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications
|
|
|---|---|---|
| Article Number | 08003 | |
| Number of page(s) | 6 | |
| Section | Session 8: Recrystallization and Grain Growth | |
| DOI | https://doi.org/10.1051/matecconf/20141408003 | |
| Published online | 08 October 2014 | |
Hot isostatic pressing of single-crystal nickel-base superalloys: Mechanism of pore closure and effect on Mechanical properties
1 Technical University of Berlin, Institute of Material Science and Technology, Ernst-Reuter-Platz 1, 10587 Berlin, Germany
2 Federal Institute for Materials Research and Testing (BAM), Unter den Eichen 87, 12205 Berlin, Germany
3 All-Russian Institute of Aviation Materials (VIAM), Radio Str. 17, 105005 Moscow, Russia
4 Central Institute of Aviation Motors (CIAM), Aviamotornaya Str. 2, 111116 Moscow, Russia
a Corresponding author: alex_epishin@yahoo.de
Pore annihilation was investigated in the single-crystal nickel-base superalloy CMSX-4. HIP tests at 1288 °C/103 MPa were interrupted at different times, then the specimens were investigated by TEM, metallography and density measurements. The kinetics of pore annihilation was determined. The pore closure mechanism was identified as plastic deformation on the octahedral slip systems. A model describing the kinetics of pore closure has been developed on the base of crystal plasticity and large strain theory. Mechanical tests with the superalloy CMSX-4 and the Ru-containing superalloy VGM4 showed, that HIP significantly increases the fatigue life at low temperatures but has no effect on creep strength.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.