Open Access
| Issue |
MATEC Web of Conferences
Volume 14, 2014
EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications
|
|
|---|---|---|
| Article Number | 07001 | |
| Number of page(s) | 6 | |
| Section | Session 7: Process - Microstructure Interactions | |
| DOI | https://doi.org/10.1051/matecconf/20141407001 | |
| Published online | 29 August 2014 | |
- R. B. Thompson and D. O. Thompson: Proc. IEEE, 1985, vol. 73, pp. 1716–55 [CrossRef] [Google Scholar]
- J. P. Monchalin: Rev. Quant. Nondestruct. Eval., 2004, vol. 23, pp. 3–31 [CrossRef] [Google Scholar]
- A Moreau, D Lévesque, M Lord, M Dubois, J P Monchalin, C Padioleau, and J F Bussière: Ultrasonics, 2002, vol. 40, pp. 1047–56 [CrossRef] [Google Scholar]
- M. Dubois, M. Militzer, A. Moreau, and J. F. Bussière: Scripta. Mater., 2000, vol. 42, pp. 867–74 [CrossRef] [Google Scholar]
- S. Kruger, G. Lamouche, J.P. Monchalin, R. Kolark, G. Jeskey, and M. Choquel: Iron Steel Technol., 2005, vol. 2, pp. 25–31 [Google Scholar]
- S. Sarkar, A. Moreau, M. Militzer, and W.J. Poole: Metall. Mater. Trans. A, 2008, vol. 39, pp. 897–907 [CrossRef] [Google Scholar]
- M. Maalekian, R. Radis, M. Militzer, A. Moreau, and W.J. Poole: Acta Mater., 2012, vol. 60, pp. 1015–26 [CrossRef] [Google Scholar]
- S.E. Kruger and E.B. Damm: Mater. Sci. Eng. A, 2006, vol. 425, pp. 238–43 [Google Scholar]
- S.E. Kruger, S. Bolognini, G. Lamouche, and A. Moreau: in Quant. Nondestruct. Eval. AIP Conf. Proceedings, Vol. 615, AIP, 2002, pp. 1518–25 [CrossRef] [Google Scholar]
- S.E. Kruger, A. Moreau, M. Militzer, and T. Biggs: Mater. Sci. Forum, 2003, vol. 426, pp. 483–488 [CrossRef] [Google Scholar]
- A. Moreau, C. Bescond, S. Bolognini, M. Lord, S.E. Kruger, and C.S. Man: Automation & Control/ Advanced OnLine Metallurgical Models/Sensors, 2005, Materials Science & Technology, pp. 3–10 [Google Scholar]
- A. Moreau, P.J. Kielczynski, J.F. Buissiere, and J.H. Root: in Nondestruct. Charact. Mater. VI, R.E. Green, ed., Plenum Press, New York, 1994, pp. 119–128 [CrossRef] [Google Scholar]
- R. C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, 2006, p. 372 [Google Scholar]
- B. Geddes, H. Leon, and X. Huang: Superalloys: Alloying and Performance, ASM International, 2010, p. 176 [Google Scholar]
- R. Cozar and A. Pineau: Metall. Trans., 1973, vol. 4, pp. 47–59 [CrossRef] [Google Scholar]
- M.S. Lewandowski and R.A. Overfelt: Acta Mater., 1999, vol. 47, pp. 4695–4710 [CrossRef] [Google Scholar]
- R. A. P. Djaic and J. J. Jonas: Metall. Trans., 1973, vol. 4, pp. 621–24 [CrossRef] [Google Scholar]
- N.K. Park, I.S. Kim, Y.S. Na, and J.T. Yeom: J. Mater. Process. Technol., 2001, vol. 111, pp. 98–102 [CrossRef] [Google Scholar]
- N. Spath, V. Zerrouki, P. Poubanne, and J.Y. Guedou: in Superalloys 718, 625, 706 Var. Deriv., E.A. Loria, ed., TMS, 2001, pp. 173–83 [CrossRef] [Google Scholar]
- D. Zhao and P.K. Chaudhury: in Superalloys 718, 625, 706 Var. Deriv., TMS, Warrendale, PA, 1994, pp. 301–13 [Google Scholar]
- H. Yuan and W.C. Liu: Mater. Sci. Eng. A, 2005, vol. 408, pp. 281–89 [Google Scholar]
- S.C. Medeiros, Y.V.R.K. Prasad, W.G. Frazier, and R Srinivasan: Mater. Sci. Eng. A, 2000, vol. 293, pp. 198–207 [CrossRef] [Google Scholar]
- J. De Jaeger, “Contribution à l'étude mésoscopique de la recristallisation dynamique de l'Inconel 718 lors du forgeage à chaud: Approches expérimentale et numérique”, Ph.D. Dissertation, Ecole Centrale Paris (2013) [Google Scholar]
- R.K. Ing and J.P. Monchalin: Appl. Phys. Lett., 1991, vol. 59, pp. 3233–35 [CrossRef] [Google Scholar]
- S. Azadian, L.Y. Wei, and R. Warren: Mater. Charact., 2004, vol. 53, pp. 7–16 [CrossRef] [Google Scholar]
- D. Cai, W. Zhang, P. Nie, W. Liu, and M. Yao: Mater. Charact., 2007, vol. 58, pp. 220–25 [CrossRef] [Google Scholar]
- A.W. Dix, J.M. Hyzak, and R.P. Singh: in Superalloys 1992, E.A. Loria, ed., TMS, Warrendale, PA, 1992, pp. 23–32 [Google Scholar]
- E.P. Papadakis: J. Acoust. Soc. Am., 1965, vol. 37, pp. 703–10 [CrossRef] [Google Scholar]
- F.E. Stanke and G.S. Kino: J. Acoust. Soc. Am., 1984, vol. 75, pp. 665–81 [CrossRef] [Google Scholar]